Customers prefer the best ssd enclosure in the 2024!

Get into the game fast as you zoom past load times with blazing speeds of up to 5,150MB/s (1TB and 2TB models). Based on read speed. 1 MB/s = 1 million bytes per second. Based on internal testing; performance may vary depending upon host device, usage conditions, drive capacity, and other factors..Data Transfer Rate:0 MB per second

Equipped with a PCIe Gen4 interface, the WD_BLACK SN770 NVMe SSD helps fuel in-game responsiveness, minimize stutter, and provide smooth streaming for a performance boost you can see and feel. PCIe Gen4 storage technology requires a compatible motherboard. WD_BLACK SN770 is backwards-compatible with PCIe Gen3.

Get tons of space for your latest games, future updates, and downloadable content with capacities up to 2TB. 1GB = 1 billion bytes and 1TB = one trillion bytes. Actual user capacity may be less depending on operating environment.

Equipped with advanced thermal management technology that helps maintain consistent performance, this reliable drive comes in an M.2 SSD form factor for compatibility with modern motherboards and laptops.

USB Type-C 3 2 Gen 2 for transfer speeds up to 10 Gbps

Supports M 2 PCIe NVM Express SSDs with 2230/2242/2260/2280 form factor M 2 NVMe SSD not included

Two Cables Included – 1x USB Type-C cable 1x USB Type-C to USB Type-A cable

Aluminum Alloy ROG Case with thermal pads pulls heat away from M 2 drives

ASUS Aura Sync RGB lighting features a nearly endless spectrum of colors with the ability to synchronize effects across an ever-expanding ecosystem of Aura Sync enabled products

Tool free design, easy to install,Transfer Rates Up to 480 Mbps when connected to a USB 2.0 port,Transfer Rates Up to 5 Gbps when connected to a USB 3.0 port.

Suitable for 2.5” SATA/SSD;Supports Standard Notebook 2.5″ SATA and SATA II Hard drives

Optimized for SSD, Supports UASP SATA III,Backwards-Compatible with USB 2.0 or 1.1

Hot-swappable, plug and play, no drivers needed

Operating System:Supported Operating Systems:Mac,Windows;Supported Windows Versions :Windows 7, Windows 8, Windows Vista, Windows XP;Supported Mac Versions:Mac OS X and Higher

CONVENIENCE: 100% Tool-Free, quickly install and remove SSDs without any tools.

DESIGN: Ultra-slim Aluminum case with ABS frame. Sleek, Durable, and Convenient. Portable yet durable, ideal for traveling.

COMPATIBILITY: M.2 form factor compatible with both SATA and NVME in sizes: 2242/2260/2280.

SPEED: USB 3.2 supports data transmission speeds of up to 10Gbps for steady and efficient data transfer. Backward compatible with USB 3.1 and USB 3.0 at respective speed limits.

PLUG & PLAY: No additional drivers required. Bus powered. Does not need an external power supply. Perfect for tech nerds, 4K content designers, and engineers. At up to 1000MB/s, Data copy and transferring will be done in in no time.

5Gbps Transfers with Accelerated UASP: Get up to 5Gbps transfer speeds with USB 3.0 ports. The SATA interface supports the UASP accelerated transmission protocol, which is 70% faster than the standalone USB 3.0 (connected to a UASP-supported computer). Backward compatible with USB 2.0 or 1.1 ports.

Safety & Stability: 2.5" hard drive enclosure adopts an advanced ASM1153E chip, built with short-circuit, over-current, and multi-protection to ensure safety for your SSD and valuable data, as well as supporting UASP/ Trim with fast transmission speed.

2.5" External Hard Drive Enclosure: Easily connect your 2.5-inch SSD & HDD to your PC, laptop, PS4, or Xbox for data transfer or expanding storage. Get protection for your hard disk from scratches and portable SATA data storage. Great for booting up old HDD/SSDs and recovering essential files from older PCs.

All-round Protection & Secure Connection: EVA foam protects your hard disk from shakes and scratches. A flexible, detachable 12-inch cable, makes it easy to connect or pack away. (Note: If there are screws on your hard drive, you should remove them first or it will not fit.)

Plug and Play & Universal Compatibility: Plug & Play, no tools or drivers needed. It supports Windows, LINUX, MacOS 8.0, and above. Designed for 2.5 inches 7mm /9.5mm SATA HDD & SSD up to 6TB. Compatible with WD, Seagate, Toshiba, Hitachi, Samsung, Crucial, SATA port SSD or HDD, and more.

【Chipset RTL9210B M.2 NVMe SATA Enclosure】M.2 Enclosure Up to 10 Gbps High speed M.2 NVME to USB 3.1 Gen 2, 6Gbps speed M.2 SATA to USB 3.1 Gen 1, perfect solution for data transfer and data backup, the actual transfer speed depends on the speed of your SSD, USB Port type, your computer performance, and NVMe /SATA media used etc.One HD movie transfer only takes 2-5 seconds.

【TOOL-FREE DESIGN】Tool-free NVMe SATA NGFF enclosure allows quick and easy installation of your M.2 NMVe SSDs or M.2 SATA SSDs. The first time you use m.2 solid state drive SSD, you need to format the disk. It will Safe for your Memory data.

【COMPATIBILITY】Compatible with M.2 NVMe/SATA PCIe M key,PCIe B&M key SSD. Note: NVMe and SATA SSD are not included. NOT Compatible with M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs. Applicable to sizes 2230/2242 / 2260 / 2280 solid state drivers.

【Support System】NVME SATA Enclosure Compatible Multi OS, Windows, Mac OS,Linux ,Android. Support UASP / Trim with ultra fast transmission speed. Supports Plug & Play and Hot-Swapping. Fits storage up to 2TB(no included).

【Aluminum Thermal Design】M.2 adapter adopts aluminum alloy shell, slim design, durable and excellent heat dissipation, reduced power consumption. Includes both USB Type-C and USB 3.1 (Type-A) cables.

Super Fast 6Gbps UASP: SATA interface supports max transfer speeds up to 6Gbps and UASP accelerated transmission protocol. 70% Faster than traditional USB 3.0. Backward compatible with USB 2.0 and USB 1.1 ports.

2nd Gen USB 3.1 Port: Standard 2nd Gen USB C 3.1 with (7+15) Pin SATA III provides ultra-fast data transfer speeds of up to 6Gbps max. (Only USB-A to UAB-C Cable included)

Travel-Friendly External Storage: URGREEN hard drive enclosure connects your 2.5-inch SSD&HDD to a PC, laptop, game console, or router for easy data transfer. Get protection from scratches and data storage for SATA hard drives.

Easy Installation & Simple Design: No tools or drivers needed, simply plug and play setup. An LED indicator displays the working status. The attached EVA foam protects your hard disks from shaking and scratches. A flexible, detachable USB-C to USB-A cable (20-in) makes it easy to connect or pack away. (USB-C to USB-C cable is Not Included)

Universal Compatibility: UGREEN Hard Drive Enclosure supports Windows, LINUX, MacOS 8.0, and above. Specifically designed for 7/9.5mm thick, 2.5 inches, 6TB HDD & SSD. Compatible with Western Digital, Seagate, Toshiba, Samsung, Kingston, Crucial, Hitachi, and more.

10Gbps Lightning Transmission: USB 3.2 Gen2 and Thunderbolt 3 compatible, the NVMe enclosure achieves data transfer rates of up to 10Gbps. With modern NVMe and SATA protocols, and UASP/Trim supported, this m.2 NVMe SSD enclosure reader is 70% faster to transfer gigabyte-sized files in seconds.

Cool to the Touch: Removing the space between the SSD and thermal pad allows for better heat dissipation through the aluminum shell and the heatsink on the surface of the USB C SSD enclosure adapter. Effectively protect your SSD from overheating and keep high transfer speed.

Safe to Use: Built-in advanced RTL9210B chip with short-circuit and over-current protection to ensure safety and stability from inside of this M2 NVMe and SATA to USB enclosure. An extra silicone case for heat isolation and all-around drop protection for accidental drops.

Easier Use: Plug & Play; no driver needed. Data backup or recovery, file transfers and storage expansion are done in no time. The white LED indicator shows the working status of the SSD enclosure. (Note: SSD is NOT included).

Broad Compatibility: The m.2 NVMe enclosure is specially designed for M and B&M Keys and for up to 8TB 2230/2242/2260/2280 sized SSDs. Applicable with Windows, Mac OS, Linux, Android, IOS systems. (NOTE: It does not support M-SATA).

USB C 2.5 External SSD Enclosure supports a 2.5" SATA SSD or HDD drive; portable external hard drive in a sturdy aluminum housing protects the SSD drive and assists with heat dissipation

Portable USB 3.1 SSD enclosure offers convenient and fast data back-up for temporary or long-term use; Diagnose internal SATA SSD drives for replacement or repair with this SATA HDD adapter

Tool free SATA hard drive enclosure offers a data transfer rate up to 10Gbps with a compatible computer; 10Gbps data transfer rate is 2x faster than USB 3.0; Thunderbolt 3 computer compatible with the included USB C cable; Supports the maximum SATA III 6Gbps data transfer rate

SSD hard drive USB C to SATA storage solution is compatible with Windows or Mac computers as a Thunderbolt 3 hard drive enclosure; USB C SSD enclosure provides a cost-effective solution for adding additional memory without opening up your laptop; UASP, TRIM and S.M.A.R.T support with compatible computers, drives and OS for increased data transfer speeds, improved CPU utilization and failure detection

10 Gbps USB C hard drive ENCLOSURE is compatible with SATA SSD or HDD drives up to 9.5mm, including 7mm; SATA to Thunderbolt 3 hard drive enclosure is compatible with SATA drives such as the Samsung 860 EVO, Kingston A400 SSD, SSD Plus, Crucial MX500, WD Blue 3D NAND PC SSD

【Chipset RTL9210B M.2 NVMe SATA Enclosure】M.2 Enclosure Up to 10 Gbps High speed M.2 NVME to USB 3.1 Gen 2, 6Gbps speed M.2 SATA to USB 3.1 Gen 1, perfect solution for data transfer and data backup, the actual transfer speed depends on the speed of your SSD, USB Port type, your computer performance, and NVMe /SATA media used etc.One HD movie transfer only takes 2-5 seconds.

【TOOL-FREE DESIGN】Tool-free NVMe SATA NGFF enclosure allows quick and easy installation of your M.2 NMVe SSDs or M.2 SATA SSDs. The first time you use m.2 solid state drive SSD, you need to format the disk. It will Safe for your Memory data.

【COMPATIBILITY】Compatible with M.2 NVMe/SATA PCIe M key,PCIe B&M key SSD. 【Note: NVMe and SATA SSD are not included.】 NOT Compatible with M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs. Applicable to sizes 2242 / 2260 / 2280 solid state drivers.

【Support System】NVME SATA Enclosure Compatible Multi OS, Windows, Mac OS,Linux ,Android. Support UASP / Trim with ultra fast transmission speed. Supports Plug & Play and Hot-Swapping. Fits storage up to 2TB(no included).

【Aluminum Thermal Design】M.2 adapter adopts aluminum alloy shell, slim design, durable and excellent heat dissipation, reduced power consumption. Includes both USB Type-C and USB 3.1 (Type-A) cables.

🚀【10Gbps Extreme Speed】Chipset RTL9210B M.2 NVMe SATA Enclosure: M.2 Enclosure up to 10 Gbps high speed M.2 NVME, 6Gbps speed M.2 SATA though USB 3.1 Gen 2, perfect solution for data transfer and data backup. One HD movie transfer only takes 2-5 seconds.

🚀【Aluminum Thermal & RGB Design】M.2 adapter adopts aluminum alloy shell, slim design, durable and excellent heat dissipation. Thermal pads can protect your SSD from overheating when trading large files. Besides RGB Light shows the data transfer status, cool and nice touch.

🚀【Wide Compatibility】GMM M.2 enclosure compatible with both SATA and NVMe in sizes 2242/2260/2280, such as M.2 NVMe/SATA PCIe M key, PCIe B&M key SSD.NOT Compatible with M.2 PCIe AHCI SSDs, M.2 PCIe devices. Support System Multi OS, Windows, Mac OS, Linux, Android.

🚀【Tool Free Design】100% tools-free, NVME SATA SSD Enclosure allows quick and easy installation of your M.2 NMVe SSDs or M.2 SATA SSDs. PLUG & PLAY, perfect for first time users. Note: The first time you use m.2 solid state drive SSD, you need to format the disk.

🚀【Type C Interface】This nvme drive enclosure includes USB Type-C 3.1 and USB 3.0 Type-A cables. USB-C Gen 2 (10 Gbps) or Thunderbolt 3 (10 Gbps) are recommended for extreme speed performance. Backward compatible with USB 3.1 Gen1 and USB 3.0, speed up to 5Gbps.

【Applicable SSD 】- This M.2 SSD Enclosure only for NVMe M-Key M.2 SSD (PCIE-based). Applicable to sizes 2242 / 2260 / 2280 solid state drivers. Does not support M.2 SATA based SSDs, M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs.

【Type C interface】- Both side can be inserted; USB-C Gen 2 10Gbps or Thunderbolt 3 are recommended for extreme speed performance. One HD movie transfer only takes 2 seconds; Backward compatible with USB 3.1 Gen1 and USB 3.0 up to 5Gbps.

【Aluminum Alloy Shell】- Adopts aluminum alloy shell, slim design, durable and excellent heat dissipation, be portable and easy to carry;

【Blue Indicator】- Blue Indicator shows the data transfer status, easy and clear;

【High Quality Master Chip】- Adopts high performance controller IC, Complies with UASP, Trim which can effectively improve the speed and exteend the lifetime of SSD. Compatible Multi OS, Windows 7/ 8/ 8.1/ 10/ Linux/ MAC.

➤ Support SSD Life Prediction and Identify the Authenticity of Information to Avoid Buying Inferior Disks: DOCKCASE - The first smart SSD enclosure with an HD display screen, can complete the intelligent detection of SSD when the Smart SSD Enclosure is powered on. DOCKCASE can timely detect and display the SSD health status after power-on, disk life, disk power-on times, and remaining capacity at a glance. Safer data, more assured work.

➤ Support Hot Swap, Can Provide 5s PLP Prevent Writing Data Loss: The Power Loss Protection of DOCKCASE Smart SSD Enclosure provides around 5 seconds of writing time after power failure (the actual time will be affected by the working state and power consumption of the SSD), no data loss, no disk damage.

➤ Sopport 10 Gbps HIGH SPEED: DOCKCASE M.2 NVMe SSD external case adopts Realtek RTL9210B control chip and latest USB 3.1 Gen 2 Type-C interface. Support UASP acceleration protocol and support theoretical data transmission speed of up to 10Gbps. When using high-performance NVMe media, the read/write performance can exceed 900 Mbytes/sec. Included USB-C to USB-C and USB-C to USB-A cables, works with USB-C/USB-A hosts.

➤Compatibility: DOCKCASE M.2 to USB enclosure fits NVMe PCIe/SATA AHCI NGFF size 2230/2242/2260/2280,support M-Key and B&M Key UASP (up to 2TB SSD)

➤Support Dual Heat Dissipation: In addition to supporting NVME and SATA, DOCKCASE RTL 9210B control chip is equipped with temperature control with can be up to 10 degrees lower than other chips, reducing heat generation from the source. The first cover with the graphite thermal pad increased the heat dissipation area and blow away the heat timely enabling your SSD to maintain high transfer speeds and extending its longevity.

【Dual-slot NVMe Enclosure】This dual-slot M.2 adapter has two independent M.2 NVMe SSD enclosures, run a single SSD independently, and connect two data cables simultaneously to read two SSDs. No power adapter required.

【All-aluminum Heat Dissipation】ORICO M.2 NVMe Case adopts aluminum alloy striped rib design to expand the heat dissipation area, with two heat dissipation vests (heat sinks) and two silicone thermal pads to reduce the damage of SSD during high-speed operation.

【Tool Free Installation】You just need to put your SSD into this M.2 NVMe usb adapter and secure the SSD with a rubber plug, then connect usb cable with your device to use. Tool-free installation lets you use your SSD quickly. No need for any driver, plug and play, support hot swap.

【10Gbps Transfer Speed】This USB 3.2 Gen2 SSD case supports UASP acceleration protocol and Trim, which can make your NVMe SSD run faster and more stable. The 2 bay nvme case also comes with a portable 2-in-1 cable to give you more options. The fastest transmission speed of C to C/A cable can reach about 1000MB/S.

【Wide Compatibility】This M.2 SSD enclosure is suitable for NVMe M-Key (PCI-e based) SSDs in sizes 2230, 2242, 2260, 2280 (storage up to 2x4TB). Supports Windows/Mac/Linux systems, not only for PCs and laptops, but also for smart TVs, mobile phones (supporting OTG), smart routers, and PS3/PS4/XBOX, etc.

WD 4TB SSD Upgrade Kit by Fantom Drives - Includes 2TB Western Digital Blue SSD, 2.5" Hard Drive Enclosure, and Drive Cloner Software in a USB Drive - Great for Gaming PC, Gaming Laptops, and MacBook Pro

Easy to install 4TB WD Blue 3D NAND SSD (Model # WDS400T2B0A), Comes preformatted NTFS for Plug and Play with PC's and Laptops

WD Blue TLC 3D NAND SATA SSD is synonymous with reliability and speed, It is very fast with sequential read speeds up to 560MB/s and sequential write speeds up to 530MB/s, It has an industry-leading 1.75 million hours mean time to failure

Includes Fantom Drives 2.5" USB 3.0 Aluminum enclosure to be used with old drive, USB 3.0 is backwards compatible with USB 2.0, Compatible with Windows 7, 8, 10 and Mac OS 8, Mac OS X and later, Fantom Drives data storage cloning utility for hard drives and SSD software is compatible with Windows, Mac computers have their own built-in cloning software In their operating System, Fantom Drives data storage cloning utility comes in a USB drive

[Higher Compatibility] This USB C 3.2 SSD enclosure works well for Apple original Mac SSDs with 12+16 Pins. DOES NOT support Toshiba 12+16 PIN SSDs (*please make sure your SSD in Mac is not a Toshiba one before purchase). NOT compatible with all SATA SSDs, or third-party SSDs. Support M.2 NVMe SSDs with an enclosure interface adapter.

[Faster Data Transmission] 10Gbps transmission speed with USB 3.2 Gen2 interface. Save and transfer data in a seconds. It can also reach 20Gbps transmission speed with USB 3.2 Gen2x2 if the computer supports.

[Friendly Design] ACASIS USB C 3.2 SSD enclosure is sturdy and portable, with aluminum alloy case for quicker heat dissipation. To prevent it from being disconnected from your Mac or PC, we advise you: ① put PCB back into the enclosure and tighten the screws to use (which will also help dissipate heat effectively); ② deselect “Put hard disks to sleep when possible” both in Battery and and Power Adapter.

[System Requirements] ACASIS USB C 3.2 SSD enclosure supports Windows7/8/10/11,Mac OS 10.0,Linux 2.6 or later.Supports for 2013-2017 MacBook Air, 2013-2015 MacBook Pro Retina, 2013-2014 iMac, 2013 Mac Pro

[Easy Installation] Just take out the PCB board from the enclosure,then fully insert SSD to card slot of the PCB board, we advise you put PCB back into the enclosure and tighten the screws to use. So it can get effective heat dissipation or it will disconnected in your Mac or PC. Plug and play, support hot plug.On Windows OS, hard disk will not available on "This PC"/ "My computer", please find your drive from "Disk Management".

🐳【Upgraded Apple SSD Adapter】This USB C 3.2 Macbook SSD enclosure works well for Apple original Mac SSDs with 12+16 Pins.Compared to the same type of macbook ssd adapter compatibility is more ad, also support Toshiba MacBook SSD/Toshiba MacBook SSD 656-0021A and OWC Macbook SSD.It also comes with an M.2 adapter that supports M.2 NVMe SSDs.

🐳【20Gbps High Speed Data Transfer】USB 3.2 Gen2 interface, mac ssd enclosure is capable of 10Gbps transfer speeds under normal conditions, and can reach 20Gbps via USB 3.2 Gen2x2 if the PC supports it. Transferring large files and movies takes only a few seconds to complete.

🐳【Ultimate Thermal Design】Macbook pro ssd enclosure is designed with aluminum alloy, while the enclosure features a recessed slash design to increase the contact area with air and improve heat dissipation. If you want a better thermal design, note: 1. You can put thermal conductive adhesive stickers on the SSD hard drive to increase the efficiency of heat transfer. 2. deselect "Put hard disks to sleep when possible" both in Battery and and Power Adapter.

🐳【System Compatibility】USB C 3.2 Macbook Air SSD enclosure supports Windows7/8/10/11,Mac OS 10.0,Linux 2.6 or later.Supports for 2013-2017 MacBook Air, 2013-2015 MacBook Pro Retina, 2013-2014 iMac, 2013 Mac Pro.

🐳【Convenient Operation】Plug and play, support hot-swappable. Just plug the SSD hard drive into the corresponding interface of the mac pro ssd adapter, screw the fixing screws, then cover the PCB cover and screw the four screws on the PCB cover to use it normally. If you are using an M.2 hard drive, you only need to plug the included M.2 adapter into the interface.

Lightning-fast 40Gbps. Using Intel JHL7440 high-end main control chip, nvme enclosure supports ultra-high speeds up to 40Gbps, Speed test with Samsung 980 EVO Plus on Macbook Pro, Read / Write speed reaches up to 2800MB/s / 2500MB/s.（ If your SSD does not support NVMe protocol, the speed will not exceed 600MB/s.）

Smaller and more portable. The size of the Aluminum External Hard Drive Enclosure is 10*6.1*1.45cm, small, exquisite, and easy to carry, making this M.2 nvme enclosure a good work and life partner. Equipped with Thunderbolt 3 C-to-C data cable, Let you have a super high-speed experience at any time.

Excellent Heat Dissipation. Attach the thermal pad on the SSD for optimum contact with the aluminum alloy shell to dissipate heat more effectively and rapidly for better protection of SSD

Extensive Compatibility. ACASIS M.2 NVMe SSD Enclosure built-in Intel JHL7440 chip, adopts dual-chip master control,equipped with 40Gbps Type-C interface.The NVMe Enclosure supports Thunderbolt 3/4 and is backward compatible with USB 4/3.2/ 3.1/ 3.0/ 2.0 at respective speed limits to meet a variety of work and daily needs.

Plug and Play. This M.2 NVMe Enclosure supports M1 Pro/Max Mac devices and iPad Pro.Compatible with Windows, macOS and Linux. Just plug and play without a driver.Our NVMe Enclosure supports hot-swapping without affecting the rest of the server's capabilities.

Great Service. ACASIS strives to offer the most satisfactory service with high-quality products and dedicated technical support. For any questions related to the product, feel free to contact us, and we will provide you with a viable solution within 24 hours.

【EASY TO USE PORTABLE SSD DOCK】: This hard drive enclosure for M Key/B & M Key NVMe PCIe SSDs, Supports 4 x 2TB M.2 PCIe NVMe hard disk reads and writes at the same time.No need any tools.no drivers required. LED indicator lets you know the working status easily.

【4bay NVMe SSD】:This NVMe M.2 dock for M/B&M Key NVMe PCIe 2242 2260 2280 22110 SSDs, Supports 4 M.2 PCIe NVMe hard disk reads and writes at the same time.

【Two sets of clonal designs】: 2 groups of clone design, can clone 2 different NVMe hard disks at the same time. Independent switch control, do not affect each other, higher efficiency.

【ONE-KEY OFFLINE CLONE】: No need to connect to a PC, Just connect in the power and long press the clone button then you can back up your important data. Support system disk clone.Please make sure the capacity of target disk is larger or equivalent to that of source disk.(It's normal that the product heats up, for the high-speed NVMe M.2 drives generate much heat while working. Do not touch the SSD during operation.)

【HIGH-SPEED】:Type-C USB 3.1 Gen2 supports up to 10Gbps transmission rate.it takes the ASM2362+VL820 main control chip which can make your NVME SSDs run more quickly and stably.

【EFFICENT HEAT DISSIPATION】:Better dissipation performance, better protection of hard disk, effectively extend the lifetime of SSD. Equipped with non-slip silicone pad to be more stable on the table

【WIDE COMPATIBILITY】：Compatible with Windows XP / 7 / 8 / 10, Mac OS. Can be used to offline clone or to expand storage capacity by connecting PC , smart phone.devices.

PORTABLE EXTERNAL STORAGE: this M.2 hard drive enclosure is specially designed for M Key NVMe PCIe SSD(22110/2280/ 2260/ 2242), Supports 2 M.2 NVMe hard disk reads and writes at the same time. Compatible with Windows/Mac/Linux, can be used to offline clone or to expand storage capacity by connecting PC , Laptop computers, smart TVs, PS4, XBOX and other devices.

ONE-KEY OFFLINE CLONE: This dual-slot hard drive enclosure can not only be used as an external NVME SSD to expand your storage capacity, but also can be used for offline backup. No need to connect to a PC, just plug in and press the start button then you can back up your important data. LED indicator can monitor the SSDs' clone progress at any time. Note: please back up the data on the target disk before cloning to avoid losing important data.

10GBP/S HIGH-SPEED: ORICO USB 3.1 Gen2 hard disk docking station is equipped with C to C cable and C to A cable, giving you more choices. The fastest transmission speed can reach about 1000MB/S with C to C cable and about 500MB/S with C to A cable. At the same time, it supports UASP acceleration protocol which can make your NVME SSDs run more quickly and stably.

EASY TO USE: ORICO Tool-Free SSD docking stations are very easy to use, no need any tools. They all support plug & play and hot swap, no drivers required. Except the SSDs, you do not need to prepare anything else, because the package contains all the accessories you need: two 0.5m data cables (A to C and C to C) and a 5V/4A power adapter.

12-MONTH-WORRY-FREE WARRANTY: ORICO M.2 external drive docking station will automatically go to sleep after 10 minutes of inactivity; the hard disk is not inclued in the package; ORICO offers 12-month warranty and lifetime email technical support. If you have any problems, please contact us, we will give you a satisfactory solution within 24 hours.